Download >> Download Origin technologies hs 702 manual

Read Online >> Read Online Origin technologies hs 702 manual

For very wide welds, the HS702 sensor with a 1.2" or 1.9" FOV could be used. The LG5000 controller (for use with Since the only thing visible to an inspector is top surface of the weld between the two panels, there is practically no manual or mechanical means of measuring parameters of a fillet weld. LaserGauge System
Graphical and text instructions guide the operator to the proper measurement locations. Color-coded results and audible tones alert the operator to out-of-spec conditions. Gauge Mode - The LG5000 controller supports all LaserGauge® measurement and analysis algorithms including virtual Prod LG5000 Gauge gauges
The routines guide operators through each measurement point using graphic and/or text instructions. Calculations using the measured values can be Origin Technologies Corporation. 256.461.1313. you tube linked in. Origin Technologoes Corporation Origin Technologies Corporation 9238 Madison Boulevard, Suite 845
On-screen point and select functions can be used to manually measure extraordinary features. Measurement values are saved to a file automatically and each scan can be saved and cross-referenced to the measurement values for documentation purposes or subsequent analysis. HS702 Sensor - Routine Mode. Routine
The routines guide operators through each measurement point using graphic and/or text instructions. Calculations using the measured values can be incorporated into the routine and the user can establish the format for the data stored in files on the LaserGauge®. DEVELOP ROUTINES. Organize Routines - Routines are
On-screen point and select functions can be used to manually measure extraordinary features. Measurement values are saved to a file automatically and each scan can be saved and cross-referenced to the measurement values for documentation purposes or subsequent analysis. HS702 Sensor - Routine Mode. Routine
The multipurpose HS702 or HS703 DSP sensors with Blue Laser Technology are the most widely used for exterior applications around solid door panels AND tranparent surfaces. Additional text instructions are provided in message windows and out-of-spec measurements are displayed in red in the data table. As the
Utilizing the Cross-Vector scanning technology, the LaserGauge Automation System provides more surface information around the edges of assembled panels to various formats, pushed directly into the plant's data handling system, and/or passed to a Fitter's Station for a manual refit and follow-up inspection of panels.
LaserGauge measures gap, flush, fit, radius, flange length, angle, pitting, corrosion, welds, dents, and wear utilizing a laser-based, portable inspection system for precision dimensional measurements in automotive and aerospace applications.
Manual tools like feeler gauges depend too much on the operator's individual abilities. REQUIREMENTS These sensors are smaller and fit into tighter spaces than the larger HS702 sensor. They also have a Profiles of gap and flush features can be saved and provided as documentation of out-of-spec conditions.
     

http://forum.us.kick9.com/viewtopic.php?f=46&t=772411 https://www.flickr.com/groups/4242764@N25/discuss/72157666738012009/ http://dayviews.com/dxhfrsq/523629034/ http://svwiqhs.volshebniy.ru/viewtopic.php?id=115 http://www.tulugarfavorito.com/social/m/feedback/view/Oil-trading-manual-david-long-loyola